Our Products: Spokane
Air Reps has unparalleled access to many of the world’s leading HVAC manufacturers and their unique technologies. As a result, we have the rare ability to investigate several scenarios during the early design phase of a project. This collaborative process may involve visits to our manufacturer’s factories or on-site design meetings to collectively develop the optimum solution.
Packaged rooftop units, fan coils, heat recovery, condensing units, heat pumps, chillers, custom products.
Variable speed drives designed specifically for HVAC applications and fan and pump motor control applications.
Custom direct fired industrial heaters.
Complete line of exhaust and supply fans and louvers. (Spokane Office Only)
Commercial HVAC products designed for 100% OA, Geothermal, Rooftop, AHU and Gas Heat applications. Products include packaged RTU’s, Heat Pumps, Split Systems, Infrared, and Indirect and Direct Gas Fired Heaters. Specializing in 100% Outside Air Applications.
Provides products for shaft grounding bearing protection.
A line of radiant ceiling panels.
Vertical and ceiling heating and air conditioning units for classroom applications.
Provider of systems for Airflow measurements and airflow control.
AMERICAN AIR FILTER
Provider of air filters and variety of filtration products.
Custom chillers and process cooling systems and accessories for medical, process, military, dry cleaning and modular HVAC air conditioning chiller applications.
Provider of gas and refrigerant leak detection systems.
BALTIMORE AIRCOIL COMPANY
Cooling towers, fluid coolers and ice storage systems.
A full line of electric resistance heating products including unit heats, convectors, cabinet heaters, radiant heaters and wall heaters, both residential and commercial.
A line of air blending units.
A line of thermal HDPE underground ductwork products.
Electric duct heaters, unit heaters, make-up air unites and gas detectors.
BROAD USA, Inc.
The largest manufacturer of absorption chillers in the world. Available in sizes ranging from 7 to over 3,300 tons, capable of providing hot and cold water generated from steam, natural gas, biogas, diesel, recycled oil or waste heat energy.
CLEANSUITE by HUNTERAIR
Modular, ceiling-hung plenum with integrated filtration, electrical, piping and structural equipment supports commonly used in hospital operating rooms, surgery centers and other laminar flow applications requiring low turbulence airflow and optimized contamination control.
Provider of modular chiller systems.
Premium efficiency indirect evap cooling. New construction or retro-fit.
Passive and active chilled beams, new and replacement perimeter induction units, 2-pipe and 4-pipe units.
Variable Refrigerant Volume systems available for air and water-cooled applications; _unified heat recovery or heat pump condensing units with inverter compressors. Duct free and ducted fan coil options allow for design _flexibility for any application. Complete line of mini splits in R-410a with inverter compressors.
Complete line of commercial HVAC products from 25 to 3000 tons including rooftop units, split systems, air handling units and water chillers.
Variable Refrigerant Volume systems available for air and water-cooled applications; unified heat recovery or heat pump condensing units with inverter compressors. Duct free and ducted fan coil options allow for design flexibility for any application. Complete line of mini splits in R- 410a with inverter compressors.
Customized solutions to protect data processing centers from overheated and humid environments including High Heat Density Solutions, In- row Cooling Solutions, Floor Mounted Cooling Solutions, Ceiling Mounted Cooling Solutions, Remote Condensers and Condensing Units – all utilizing EC inverted rotor motor fan technology.
Provider of electric duct heaters.
Industry leading, field tested membrane for high heat and water vapor recovery. State of the art ERV exchanger designs. Automated production equipment for exchanger manufacturing
The Dynamic V8 Air Cleaning Systems, MERV 13-15+ performance without ionizing or Ozone generation. A dust holding capacity of up to 10 times that of standard cartridge and bag filters means that the filter media loads throughout the 1-inch depth of each of the eight media pads and 360-degrees around each fiber, and maintenance intervals measured in years instead of months.
A line of VAV boxes, fan coils, and small AHUs.
Flanders Air Filtration engineers and manufactures a complete line of commercial and industrial filtration products. Flanders’ offering includes basic efficiency, extended media, cartridge, bag, HEPA, carbon, gas phase, BIBO and other specialty containment housings.
FLOW CONTROL INDUSTRIES, Inc.
Flow Control Industries, Inc. is a specialty manufacturer of high-performance pressure independent control valves ranging from 1/2″ to 8″. DeltaPValves® are proven to reduce energy consumption in heating and cooling systems by 20 to 40%.
Chemical free water treatment.
Custom air handlers and DX refrigeration utilizing evaporative, air-cooled and water-cooled condensing. Custom penthouse units and evaporative-cooled chillers are available ranging from 60 to 1000 tons.
HAYS FLUID CONTROL
Provider of auto _flow control valves and hose kits.
HEAT PIPE TECHNOLOGY
Provides air-to-air heat exchangers and products for pool dehumidification.
Custom air handlers that incorporate FANWALL Technology for greater flexibility in design and increased fan efficiencies.
Offers solutions for odor and corrosion control by raising absorption and oxidation with activated carbon and other impregnated molecular sieves.
Kelvion offers plate heat exchangers, shell & tube heat exchangers, finned tube heat exchangers, modular cooling towers and refrigeration heat exchangers.
A line of grilles, registers, diffusers, and VAV boxes.
Tower sump sweeper and water filtration systems.
Provider of chilled beam and radiant sail products.
Custom rooftop heating and AC units up to 1200 tons with air-cooled, water-cooled and evaporative-cooled condensing. Custom air-cooled and evaporative-cooled chillers are available with FANWALL Technology, also Water source heat pumps and V-Cube self-contained floor- by-floor units.
MESTEX (APPLIED AIR, AZTEK, KING)
From Hospital Ventilation to Kitchen Make- Up Air, every application has a unique set of needs, and Mestex has just the solution to meet them. Applied Air product mix includes packaged dedicated outdoor air systems and ventilation equipment, direct gas fired, indirect gas fired, air turnover, and evaporative cooling systems. Aztec Indirect and Indirect/Direct Evaporative Cooling Units are an energy-efficient solution that creates an optimal environment for server performance while lowering data center’s PUE. King – KIC Air Curtains offer protection against cold or hot outside air, outside wind, airborne insects, and airborne particles and contaminants.
Provides industrial / commercial corrosion-resistant axial fans and centrifugal blowers.
Gas fired, steam and electric make-up air and heating equipment.
A line of specialty chillers and cooling systems.
MUNTERS / DES CHAMPS LABS
Line of custom heat recovery air handling equipment including heat pipes, heat wheels, and make-up air units.
Fan terminals, VAV terminals, fan coil units and fire/smoke dampers.
NAT'L SYSTEM OF GARAGE VENTILATION
Provides products for garage ventilation exhaust systems.
NELSON HEAT TRACE
The industry’s broadest line of heat tracing cables.
Complete line of humidification equipment including electric, gas, steam, and adiabatic systems (including evaporative cooling systems).
Provider of automatic balancing valves, and manual vent.
A line of induction and chilled beams and pool dehumidification units.
A line of liquid leak detection systems.
Provider of laboratory fume hood & isolation room controls.
Provider of roof equipment and pipe supports as well as VRV equipment supports & refrigerant pipe supports.
Pool ventilation heat recovery systems. Systems provide full pool and space temperature control with heat recovery of pool or potable water.
Pottorff offers a complete line sound attenuation options include, sound traps and elbow attenuators. Pottoroff has a full engineering capability to custom design attenuators to specifically match your projects requirements.
A revolutionary piping connection system for HVAC air conditioning and DX refrigeration systems using aluminum and/or copper tube which require no heat, brazing, or purging. Re-ok’s modern piping, components and joint kits result in substantially reduced installation and material costs.
Heat recovery units with total energy recovery hydroscopic static plate type heat exchanger, indoor and outdoor units, DOAS units and plate only type units.
A line of data center solutions racks, wiring raceways, and aisle containment.
Provides products for Hydronic Radiant Heat.
A line of fin-tubes, convectors, unitheaters, and radiant cooling / heating panels.
Dehumidification systems including chilled water, DX, desiccant with regeneration using hot water, steam, electric or gas. High filtration units, Indoor and outdoor units available.
Manufacturer of modular central plants including chiller plants, hot water boiler plants, steam boiler plants and cogeneration plants; CritiChill® modular indirect evaporative cooling; custom modular pumping systems including VariPrime™; and standard pump packages. Custom designed, factory assembled, performance tested, and delivered to the worksite ready for installation.
A line of thermally insulated dampers, airfoil control dampers, backdraft dampers, and multizone dampers.
Line of custom air handling units, fan coil units, and triple deck multi- zone units featuring FC, plenum fan and FANWALL Technology. DX, chilled water, steam and hot water coils.
A division of Nailor International, Inc. – Custom air handling units, fan coils, air cooled condensers, air columns, and blower coils.
A line of air quality sensors and mechanical room monitoring systems.
Provider of line reactors and protection for drives.
TWIN CITY FANS
A complete offering of Commercial Fan Products to suit your job requirements for General exhaust, Kitchen exhaust, Laboratory exhaust and many other applications. TCF is also on the forefront with new ECM motor offerings for many of our fan models. Please call or e-mail for fan selections or information.
UNITED COOL AIR
Provider of specialty AC units (1-20 tons) and gas heat PTAC units.
Full line of UV-C products for HVACR Industry.
Custom energy recovery ventilators, heat recovery ventilators and integrated air handling units. Options include enthalpy wheels, plate heat exchangers and heat pipe technology. Heat and energy recovery units are available with FANWALL Technology.
Comprehensive range of air handling solutions utilizing integrated frame construction, modular configurations or knock-down units for field assembly where required.
Complete line of standard and custom sound attenuation devices, vibration isolators, seismic restraint systems and floating floors.
Custom Air Handling products featuring packaged refrigeration and energy recovery. High Efficiency Refrigeration featuring DX, WSHP, DEC, IDEC, Evaporative Condensing. Energy Recovery technologies – Enthalpy Wheels & Flat-Plate HX, Heat pipes, Run-Around Coils. Solutions for 100% OA / DOAS systems – Energy Recovery – Natatorium – Dehumidification – Data Center – Waste Water Treatment – Industrial plants.